Egg tray production equipment manufacturer. Egg tray machine is a general term for manufacturing pulp and egg tray machinery used for long-distance transportation of eggs. It is mainly composed of forming machine, hydraulic pulper, vacuum dehydrator, air compressor and drying box. Today we will mainly take a look at the advantages of the egg tray machine. The polished pulp is transported to the egg tray machine through a pipeline, and different styles of egg trays can be manufactured through different molds on the host. The molds can also be replaced to produce industrial packaging such as apple trays, wine trays, and seedling trays. After the shape is successful, the basic shape of the egg tray comes out, but at this time they are still wet. Need to proceed to the next step.

The forming quality of the egg tray machine is habitually divided into good, poor, or very poor. The standard for classification is the degree of homogeneity of the egg tray or the uniformity of fiber distribution. The storage and flow of pulp in the beating system of the egg tray machine and the forming structure and performance of the egg tray machine affect the fiber distribution in the paper molded product to a certain extent. The mark of good molding is the uniformity of fiber distribution, which is a common molding quality item. It requires the same fiber concentration in a certain area selected arbitrarily on the egg tray. The closer the fiber distribution is to this ideal state, the more homogeneous it is.

The raw material of the egg tray machine is waste paper, and the main physical reaction in the production and processing process, only a few chemical products are added as waterproofing agents, and these chemical materials are basically all retained in the finished product after the product is dried, and there is no discharge Dyeing, this is the environmentally friendly raw material selection for egg tray machines.

Pulp made by egg tray machine has been used in the industry for many years. With its good protective performance and low price, it has become an ideal product for packaging eggs and fruit products. Among them, the production mold of the egg tray machine also played a very important role.

Rotate the host to observe the matching gap between the forming mold and the transfer mold. Check whether the gap between the forming mold and the transfer mold is consistent. Observe the four corners of the mold contact surface. A clearance of 1 mm is a good fit. If the selected host is a multi-face molding machine , Turn it to see whether the gap between each surface forming mold and the transformation mold can meet the required gap.